Impregnacy Betoncryll Trasparente

Betoncryll Trasparente OIKOS is an acrylic-based, clear protective coating that gives concrete and stone structures a natural moisture shine, while providing highly effective protection against external stresses. The product forms a water-repellent protective film that is vapor-permeable, but prevents the penetration of water and environmental pollutants, such as CO₂ and SO₂ gases, into the structure. This prevents carbonation and corrosion of reinforcement, which are the most significant causes of concrete damage in urban environments. The product is an excellent choice when you want to preserve the original appearance of concrete, brick or natural stone, while protecting the surface from deterioration caused by weather, pollution and moisture.

Key features:

• Bright and natural wet gloss: Emphasizes the character and depth of stone materials without a covering film.
• Water-repellent and breathable: Effectively protects against moisture from the outside, while maintaining the breathability of the structure.
• Protection against carbonation: Prevents the penetration of CO₂ and SO₂ gases into the structure, which prevents premature deterioration of the concrete.
• High UV and weather resistance: Does not yellow or become brittle in sunlight or temperature fluctuations.
• Environmentally friendly and odorless: Does not contain heavy metals or toxic solvents, is not flammable.

Applications and application instructions:

Especially suitable for the following surfaces:

• Concrete: Bases, columns, facades
• Brick and natural stone: External stairs, walls, retaining walls
• Fiber cement and lime cement coatings

Surface preparation and Application method:

• Clean the surface thoroughly of loose materials, dust, soot and grease.
• Old, porous or chalky surfaces are first treated with Betoncryll Trasparente diluted with water (70–80%) as a primer.
• Apply with a brush, roller or spray (nozzle 1.3–1.7 mm)
• First layer: thinned 40% with water. Second coat: thinned 20% with water
• Drying time between coats: at least 4 hours. Fully dry in approximately 12 hours at normal room temperature (20°C, RH 75%)

Technical data:

• Coverage: 12–15 m²/l (in two coats) depending on the coat and the porosity of the surface
• Cleaning: tools are cleaned with water
• After surface treatment: the surface is easy to clean, mechanically resistant and aesthetically finished

Betoncryll Trasparente is a discreet but effective solution when you want to protect the value of concrete and natural stone materials, beautifully, sustainably and ecological.